matlabandcommunicationssignalandsystems演示文件修改版.pptVIP

Representation of Signals and Systems Continuous time or discrete time连续时间还是离散时间 Unit step function (sequence)单位阶越函数（序列） unit impulse function (unit sample Sequence)单位冲激函数（单位样本序列） Rectangular pulse function (sequence)矩形脉冲函数（序列） Unit triangular pulse function (sequence)单位三角脉冲函数（序列） square wave方波 sawtooth pulse function锯齿脉冲函数 Real exponential function (sequence)实指数函数（序列） Real sinusoidal function实正弦函数 Complex exponential function (sequence)复指数函数（序列） Basic System Properties基本系统属性 LTI (Linear Time-Invariant) System线性时不变系统 Convolution Integral (sum)卷积积分（和） Fourier Sieries傅里叶级数 Illustrative Problem 1.1 Illustrative Problem 1.3 Illustrative Problem 1.4 1.3 Fourier Transforms Illustrative Problem 1.5 Illustrative Problem 1.6 Illustrative Problem 1.7 1.4 Power and Energy Illustrative Problem 1.8 1.5 Lowpass Equivalent of Bandpass Signals DTFT (discrete time Fourier transform)离散时间傅里叶变换 DFT (discrete fourier transform)离散傅里叶变换 FFT (Fast Fourier Transform)快速傅里叶变换 [LTI system analysis in the frequency domain] The signal x(t) whose plot is given below consists of some line segments and a sinusoidal segment 1 2 0 t x(t) -2 3 4 1.Determine the FFT of this signal and plot it. 2.If the signal is passed through an ideal lowpass filter with a bandwidth of 1.5 Hz, find the output of the filter and plot it. 3.If the signal is passed through a filter whose impulse response is derive an expression for the filter output. 1 1 0 t h(t) 2 Solution: 1. conv The energy and the power contents of a real signal x(t), denoted by Ex and Px, respectively, are defined as Energy-type signal power-type signal Energy spectral density of an energy-type signal: [Power and power spectrum] The signal x(t) has a duration of 10 and is the sum of two sinusoidal signals of unit amplitude. one with frequency 47Hz and the other with frequency 219Hz. This signal is sampled at a sampling rate of 1000 samples per second. Using MATLAB. find the power content and the power spectral density for this si