黄色磷光高效蓝色荧光混合的WOLED.pptVIP

Contents Background Experimental detail Results and discussion Conclusions 全色显示 固体照明光源 液晶显示的背光源 WOLED 环境友好 超薄 重量轻高的发光效率 磷光材料：100%内量子效应，寿命短 减弱了磷光WOLED运行稳定性 结合蓝色荧光和红色或黄色磷光发射体的WOLED应运而生。但由于大多数常见的荧光材料的效率低于磷光材料的。因此，基于高效率荧光的混合WOLED的发展是实现高性能所不可或缺的。 Experimental detail The WOLEDs were based on blue fluorescent emitter PT-86 (purchased from LumTech Corporation) and yellow phosphorescent emitter PO-01 doped into blue host (PT-05) (from LumTech Corporation) and 4, 4-N, N-dicarbazole-biphenyl (CBP) hosts, respectively. Prior to device fabrication, Indium Tin Oxide (ITO)-coated glass substrates were carefully cleaned by scrubbing and sonication. All devices were fabricated with conventional process. 4,4,4-tris(3-methylphenylphenylamino)-triphenylamine (m-MTDATA) and 7-diphenyl-1,10-phenanthroline (Bphen), served as hole injection layer, and hole-blocking layer (HBL)/electron transporting layer, respectively. Tris(phe-nylpyrazole) Iridium (Ir(ppz)3)was served as hole-transporting layer (HTL) and electron-blocking layer (EBL). The thermal deposition rates were 0.1, 0.05 and 0.5 nm/s for organic materials, LiF and Al, respectively. The active area of the devices was 4 mm2. The EL spectra and CIE coordinates of the devices were measured by a PR650 spectroscan spectrometer, and the current density-voltage (J-V)-luminance characteristics were recorded simultaneously by combining the spectrometer with Keithley 2400 programmable voltagecurrent source. The color rendering index (CRI) values of the devices were calculated with software SETFOS 3.0 fromFLUXIM AG. All measure- ments were carried out at room temperature under ambient conditions. Results and discussion An increase in the PT-86 concentration can reduce the hopping distance and subsequently promote the carrier transport in the emission layer (EML), further increasing the current density in the device. In succession, devices based on PT-86 and PO-01 combinations were fabricated by utilizing BPhen and Ir