皮带转载机的设计.docVIP

皮带转载机的设计 院 （系）： 专 业： 学 号： 学生姓名： 指导教师： 年 月 摘 要 在信息技术时代, 某些关键性的技术使皮带转载机的生产产生了飞跃, 包括运行阻力计算方法、标准、动力学分析、高张力输送带设计、接头分析、输送机试验台的发展及缓冲、清扫和监控技术。作为连续散状物料运输机械已广泛应用于码头、煤矿、电厂、冶金、粮食等行业。在分析常规设计方法的基础上，对带式输送机的现代设计方法进行讨论，合理利用带式输送机的优化设计方法对皮带转载机逐步进行设计。从皮带跑偏的现象着手,分析了皮带机随机性跑偏的原因,通过利用防止跑偏装置,解决了皮带跑偏的问题。通过对长距离带式输送机张紧装置要求的分析,最终确定了张紧装置。同样的对转载机在安全方面一系列成功改造,通过安装刮渣装置的改造,取得了良好的效果,保证了岗位作业人员的身体健康和人身安全。并对皮带在运行中所产生的各类问题进行了分析，通过查阅相关资料，给出了适当的解决办法。再通过对皮带转载机的设计进行校验，最终给出了带式输送机的设计计算过程和计算结果。 关键词：皮带转载机，跑偏，张紧，改进 ABSTRACT In the information technology times, certain key technology to reproduce belt machine output in the leap, including running resistance calculation methods, standards, dynamic analysis, high tension belt design, joint analysis, conveyor test and the development of the buffer, cleaning and monitoring technology. As bulk materials transport machinery has been widely used in terminals, coal mines, power plants, metallurgy, food and other industries. Base on analysis of the conventional design method, by discussed conveyor modern design methods, rational use of the belt conveyor design optimization of the method gradually design. From the belt runs, analyzes the reasons of the belt random wrong. Through the use of devices to prevent random wrong, at last solve belt problem of random wrong. Through the long-distance belt conveyor tensioning device requirements analysis, Ultimately determine the tensioning device. As same, in the machine Security make some success improvement, with the installation of the devices removal sediment, achieved good results, ensuring the operational status of the health and personal safety. Also analyzed the various problems the belt in the operation, Through access to the relevant information, made the appropriate solution methods. Then on the belt loader design verification, and ultimately given a belt conveyor design process and the results. Keywords: The leather belt reprint machine, runs, tensioning, improvem