七台河精煤集团公司新富煤矿1.2Mta新井设计.doc

摘 要 本次毕业设计为七台河精煤集团富强煤矿1.2Mt/a的新井设计，共有6层可采煤层，总厚度约为11m，煤层工业牌号为1/3焦煤。设计井田的可采储量为103.29Mt。服务年限为62a。划分两个开采水平，两个工作面达产。 该矿井采用双立井的开拓方式，集中大巷及采区石门的大巷布置方式。共划分9个采区，采用混合式通风，综合机械化采煤，单一走向长壁采煤法。年工作日为330天，采用“四、六”式工作制，工作面长为180m。提升设备为主井采用箕斗提升，副井采用罐笼提升。 如在设计中出现一些问题，还请各位专家老师给予指正。 关键词：走向长壁 服务年限 集中大巷 提升设备 Abstract This design for the Qitaihe refined coal groupprosperous and powerful coal mine 1.2Mt/a new well design, altogetherhas 6 to be possible to pick the coal bed, the total thicknessapproximately is 9m, the coal bed industry trademark is 1/3 cokingcoal. The design well field recoverable resources are 104.45Mt. Theservice life is 62a. Delimits divides two mining levels, two workingsurfaces reach produce. This mine pit uses the double vertical shaft the development way,concentrates the big lane and picks area Shimen the big lanearrangement way. Altogether divides 9 to pick the area, the big laneinstalls lower part the car type the cart yard, uses the mixed styleto ventilate, synthesis mechanization mining coal. The year workingday is 330 days, it use four, six the type work system, the workface length is 180m. The lift technique primarily well uses basket thepromotion, the vice- well uses the cage promotion. Because myself also am at the study stage to the mine pit design, andlacks the scene experience, therefore, in this design unavoidably canhave some problems, asks fellow experts teacher to give points outmistakes. key words：Trend grows arm Service life Concentrates the big lane Lift technique 目 录 摘要 I Abstract II 绪论 I 第1章 井田概况及地质特征 1 1.1 井田概况 1 1.1.1交通位置 1 1.1.2地形地势 2 1.1.3气象及地震情况 2 1.1.5煤田发展史及近况 2 1.1.6工农业及原料供应状况 2 1.1.7水源及电源 2 1.2 地质特征 3 1.2.1矿区范围内的地质情况 3 1.2.2井田范围内和附近的主要地质构造 3 1.2.3煤层赋存状况及可采煤层特征 4 1.2.4岩石性质、厚度特征 5 1.2.5井田内水文地质情况 5 1.2.6煤质、牌号及用途 6 1.3 勘探程度及可靠性 6 第2章 井田境界、储量、服务年限 9 2.1 井田境界 9 2.1.1井田周边状况 9 2.1.2井田境界确定的依据 9 2.1.3井田未来发展情况 9 2.2 井田储量 10 2.2.1井田储量计算 10 2.2.2保安煤柱的设计方法 10 2.2.3储量计算方法 11 2.2.4储量计算评价 11 2.3矿井工作制度、生产能力、服务年限 12 2.3.1矿井工作制度 12 2.3.2设