Edited-ASM_Sem_les03.pptVIP

ASM Installation and Configuration Objectives After completing this lesson, you should be able to: Install ASM Create additional ASM instances List the configuration parameters for ASM ASM Installation: Best Practices Install ASM in a separate ORACLE_HOME from the ORACLE_HOME database: Provides higher availability and manageability. Allows independent upgrades of the database and ASM. Deinstallation of the database software can be performed without impacting the ASM instance. Create one ASM instance per node. Installing Automatic Storage Management Installation Type Specify Home Details Hardware Cluster Installation Mode Product-Specific Prerequisite Checks Select Configuration Option Configure ASM Summary Installation Progress Execute Configuration Scripts End of ASM Installation DBCA and Storage Options Creating an ASM Instance Use the DBCA to create the ASM instance. Select Configure ASM. Run the $ORACLE_HOME/bin/localconfig add command when prompted: Default parameters for the initialization parameter file are sufficient for a single instance database. Create two disk groups: Database Flash recovery area Creating an ASM Instance RAC and ASM Instances Creation ASM and ASMLib Installationand Configuration Summary Download and install the ASMLib RPMs. Run oracleasm configure. Run oracleasm enable. Create a single whole-disk partition on each disk. Run partprobe to ensure that the kernel is aware of the new partitions. Mark disks as ASM disks. Run oracleasm scandisks to make the disks available. Create the ASM instance using the DBCA. Demonstrations Install ASM in its own home directory in a RAC. Summary In this lesson, you should should have learned how to: Install ASM Create additional ASM instances List the configuration parameters for ASM Select Configuration Option You can choose from the following options on the Select Configuration Option screen: Install database software and create a database Configure ASM Install database software only (no database