预弯机毕业设计3概要.docVIP

毕 业 论 文 课题名称 钢板预弯机操作及维护 系/专 业 机械工程系/机电一体化 班 级 机 电0613 学 号 0601243150 学生姓名 黄 璜 指导教师： 丁加军 2009 年 5 月 25 日 钢板预弯机操作及维护 机 电0613 黄璜 摘要 该机是大直缝埋弧焊管生产线的主要设备之一，它是将制管用的经过铣边的钢板的两个板边进行弯曲，使钢板的板边成为渐开线的形状。钢板的板边处的曲率半径与成品管一致，板边以内的板型，逐渐变化为平直，当成型钢管时板边的曲率半径不变形，向板内的部分二次参加变形，结果使板边的曲率半径与成品钢管的半径完全一致，保证成型后钢管的圆度。 该机的特点是在一个底座上布置了两台下动式液压机，同时对一张钢板的两边进行预弯。一张钢板的预弯是分段进行的，每次预弯的长度依模具直线段的长度和钢板长度的分段情况而定。 关键字：直缝埋弧焊管，曲率半径。 It is Tachih LSAW pipe production line, one of the main equipment, it is useful to the system through the milling side of the plate to bend the two side panels, so that the plate edge to become the shape of involute. Department of plate steel edge radius of curvature of the finished tube with the same edge of the plate inside, and gradually change to straight, the time when the steel plate forming the edge of non-deformed radius of curvature to the plate to participate in the second part of the deformation, with the result that edge radius of curvature radius of the pipe and finished exactly the same shape after the steel pipe to ensure roundness. It is characterized by the arrangement in a base under the action of the two hydraulic machines, at the same time on both sides of a steel plate pre-bending. Pre-bending a steel plate is carried out in sub-paragraph each time the length of pre-bending mold according to the length of line segment and the length of the sub-plate case. Key words: Tachih LSAW； 目 录 第1章 ．概述...................................................................................................................4 1.1 机器的性能..........................................................................................................4 1.2 主要技术参数......................................................................................................4 ．机器的结构和工作原理.................................................................... ..................5 2.1机器的主要部分和工作过程.......................................................