PKS配置冗余服务器.doc

Note1: In this version, if you want to use the NIC on main board and a single identical NIC, please use the manual. Note2: Everyone must be obey the rules of anti viruses and manages our files and programs. PKS Installation Install the Win2k server: a.Please check your computer name (XXA,XXB). b.Be sure Video display:1024x768 pixels. c.Be sure your redundant server administrator password is identical. d.Install Win2K sp4 Patch e. Installing the PCIC drivers Prerequisites ??Experion PKS R201 Applications Software CD. To install the PCIC drivers: Step Action 1 Insert the Experion PKS R201 Applications Software CD into the CD-ROM drive. 2 In the Computer Management dialog box, right-click in the pane displaying the devices, and then click Scan for Hardware Changes. 3 Click Other Device and then click Reinstall Driver. 4 Click Next to start installing the driver. 5 Click Display a list of the known drivers for this device so that I can choose a specific driver and then click Next. 6 Click Other Device. 7 Click Have Disk to display the Install from Disk dialog box. 8 Click Browse and then browse to the following folder on the CD: \RSLinx\RSLinx\pnp_Drivers\Win2k\1784-PCIC(S) 9 Click OK. 10 Click A-B 1784-PCIC(S). 11 Click Next. 12 Click Yes in the update driver warning message dialog box. 13 Click Next. 14 If a confirm file replace message dialog box is displayed, click Yes to continue the installation. 15 Click Finish to complete the installation. f.Verifying the PCIC driver To verify if the PCIC driver is installed: Step Action 1 On the Windows Desktop, right-click on the My Computer icon and choose Manage. 2 Click the Device Manager item. 3 If the A-B Virtual Backplane item does not exist, Install the PCIC drivers on page 430. 4 In the Computer Management dialog box, expand the A-B Virtual Backplane item. 5 Double-click the A-B 1784-PCIC(S) item to display the Properties dialog box. 6 Click the Driver tab and then click Driver Details. 7 Click the ABPCICSW