辅机电气词汇.docVIP

13) Generating tube, header, drum, return tube, furnace, economizer, fire tube boiler, attemperator, downcomer, gas tight, refractory lining, saturated steam, wet steam, D type boiler, External super heater “D” type boiler(ESD), super heater, 13)产生管、头、鼓,还管、炉、省煤器、消防管锅炉、attemperator,下降、气体紧、耐火内衬,饱和蒸汽、湿蒸,D型锅炉、外部超级加热器“D”(简称ESD)型锅炉、超级加热器, 14) boiler mountings, condensate, fracture, rupture friable, ignite, precaution, non-return, pressure gauge, residual heat, sample connection, soot blower, steam trap, turbine-generator, Safety valve, relief valve, main steam stop valve, water level gauge, air release gauge, blow down valve, scum valve, automatic feed water regulator, soot blower, raising steam, boiler shut-down 　　14)锅炉设备,冷凝、骨折、破裂易碎,点燃、预防、逆止、压力表、压残余热量、样品连接,烟尘风机、疏水阀,turbine-generator, 　　安全阀、安全阀、主蒸汽截止阀、水位计,空气释放仪、排污阀,人渣阀、自动进水调节阀、煤烟灰风机、升汽时,锅炉关机现象 15) 1.There are three main classes of pump in marine use: displacement（容积式泵）, axial flow（轴流泵） and centrifugal（离心泵） configuration, de-aerate, elliptical, equilibrium, erratically, overhaul, reciprocate， shaft sealing, gland and packing arrangement, suction pipe, rotary vane displacement pump, screw displacement pump, self priming, priming unit, NPSH 　　15)1。有三个主要类型泵在海洋使用:位移(容积式泵),轴流(轴流泵)和离心(离心泵) 　　配置,de-aerate、椭圆、平衡、自由、检修,回报,轴封、腺体和包装的安排,吸水管、旋叶式容积泵、螺旋容积泵,自我底漆,底漆单位,汽蚀余量 16) elastomer, hazardous, liquefy, solenoid valve, ventilation, methyl-chloride, calcium chloride brine, Vapor compression cycle, boil off, reject, ambient, primary refrigerant, secondary refrigerant, thermostat, delivery oil separator, refrigerant drier, liquid receiver, Compressor, condenser, expansion valve, evaporator, shell and tube type 　　16)弹性体、有害的,会液化、电磁阀、通风、methyl-chloride、氯化钙的海水中, 　　蒸气压缩周期,沸腾、拒绝、环境、主要冷冻、二次冷冻、温控器、交货油分离器、冷冻干燥机、液器, 　　压缩机、冷凝器、膨胀阀、蒸发器、壳管式 17) Flange, surplus, thermostatic, upright, violet, leak detector lamp, liquid hammer, phenomenon, purge valve, Duct, integral, central refrigerating plant, liquid hammer, oil hammer, under charge 17),法兰、盈余,温度、公义