Before masonry wall at the grass【DOC精选】.docVIP

Before masonry wall at the grass-roots level should experience qualified, floors, dust and debris protruding part shall be cleared away. , play on structure wall, column 2 + 1000 mm elevation, horizontal axis pop-up masonry on the beam, board, block wall edge, the position of the Windows and doors hole size, and indicate the door, humanly scaled starting point is relatively high. 3, masonry material approach must be kind, specifications, varieties, neatly stacked, layout reasonable, safe and clean. Steam concrete block to the scene should try to reduce the transit times will block the on-demand consumption directly transferred to the construction elevator, build by laying bricks or stones wall place, near the loading and unloading process, it is forbidden to throw and dumping. Approach, the stacking height less than 2 m, stacked in outdoor, to cover the rain prevention measures. 4, reserved iron, pipe should be installed ahead of schedule. 5, before the construction, should enter the scene of the block model, quantity and quality of the construction and equipment used in the acceptance. Masonry to block water, the day before the moisture content of block should not be greater than 15%, lime-sand brick requires infiltration depth of 8 ~ 10 mm. Build by laying bricks or stones to should take put down gently, in the process of fast handling to avoid damage, and should not be secondary handling. 6, plaster before the formal handover formalities related to take cover engineering unit, prevent the rework. 7, the concrete lintel, ring beam and concrete column, beam surface protruding part pointed out flat, honeycomb, pits, will, loose part pointed out the way, brush and adhesiveness slurry. Then, use 1:3 cement mortar screeding the stratification. Exposed steel head, iron filar silk and wood to eliminate, swallow the windowsill brick, wall and floor slab and beam bottom junction application of lime-sand brick build by laying bricks or stones is lacking. 8, pipe wall