Cable fixed【DOC精选】.doc

Cable fixed (4) cable fixed 1) the vertical laying cable cable or greater than 45 ℃ tilt fixed on each bracket. 1) the vertical laying cable, cable, or greater than 45 ℃ tilt fixed on each bracket. 2) ac single core cable or each phase after the split phase cable fixed clamp and support, not form a closed ferromagnetic loops. 2) ac single core cable or each phase after the split phase cable fixed clamp and support, not form a closed ferromagnetic loops. 3) cable order, little cross. 3) cable order, little cross. 4) when required by the design without, cables and pipelines of the minimum interval conforms to the requirements, and under the flammable and explosive gas pipeline laying. 4) the when required by the design without, cables and pipelines of the minimum interval conforms to the requirements, and under the flammable and explosive gas pipeline laying. (5) the fire prevention measures: laying cable in cable trench and shaft, according to the design requirements of the position, make fire cut off. (5) the fire prevention measures: laying cable in cable trench and shaft, according to the design requirements of the position, make the fire cut off. (6) hanging signs (6) hanging signs 1) sign the specification should be consistent with anticorrosion performance, mount should be strong. 1) sign the specification should be consistent with the anticorrosion performance, mount should be strong. 2) sign should be marked on the cable number, specification, model, voltage grade and the starting position. 2) sign should be marked on the cable number, specification, model, voltage grade and the starting position. 3) along the cable tray at both ends of cable laying, bend, intersections should be hung signs, straight segment should be properly set up signs. 3) along the cable tray at both ends of cable laying, bend, intersections should be hung signs, straight segment should be properly set up signs. 4, tube cable laying 4, tube cable laying (1) check the pipeline (1) check t