CellMonitor_manual_engiish【DOC精选】.doc

iDVR Mobile Surveillance Version V2.0.9 Functions To Use the cell phone monitoring software, users can connect to iDVR series equipment via a mobile wireless network and live view the video on the phone. Main Functions: Device Management Edit device properties (IP address or domain, port, user name, password); Save the DVR information on the mobile device, so you don’t need to input it again. connection and landing equipmen After the user completes editing equipment property, enter the connection channel number, then click Login, the software will automatically try to connect and login the device. If successful, returns the channels video preview. Live view the video After successful login, the user can switch the channel to live view the video. Video Adjust Users preview the surveillance video, you can enlarge the screen on the current channel, increase quality, increase frame rate. Remote control PTZ and Camera You can remotely control PTZ and camera movement as you live view the video(but you should have administrator privileges); These actions include PTZ movement (up, down, left, right), to adjust the camera’s lens aperture and focal length, camera closer and farther. Performance description Stream Type: Sub-stream I frame interval: 2 seconds Frame Type: Single P frames Frame rate: 5 frames / sec Resolution: QCIF (176x144), SCIF (320x240) Installation Operating Environment Smart phone / PDA (support CLDC1.0, MIDP2.0 or later) Installation Instructions Open the CellMonitor folder in CD-ROM installation directory, which contains the English version of the cell phone surveillance client and the beta version of the simulator, according to user’s need to copy the corresponding files(CellMonitor.jad and CellMonitor.jar) to your phone in the directory, open CellMonitor. jad file into the installation process. Select the storage(phone memory or expansion card ) to install the software, and then click Continue. If