详细资料下载-上海高特.docVIP

DR/SC系列新型阀门气动执行器 DR/SC series new type valve pneumatic actuator 概述 introductionDR/SC新型齿轮齿条式气动执行器由我公司综合了国内外最新技术，通过CAD三维模型创新优化设计，外形美观紧凑、现代化的造型；并采用实用新型材料、新工艺，使产品的质量、性能更加可靠；多规格选型更经济实惠；产品全面符合最新国际标准技术规范，满足现在和未来的需求。 DR/SC series gear rack valve pneumatic actuator applies latest technology home and abroad. CAD three-dimensional module is used to make better design. With compact design and modern modeling, it is made of new materials, and new technology is used to ensure stable performance. Lectotype of many specifications is economic and practical. The product meets the requirement of latest international standard technology, which is to ensure present and future demand. 齿轮齿条双活塞对称结构设计，动作快速平稳，精度高，输出功率大，通过简单的改变活塞装配位置可得到反方向旋转。 Gear rock double-piston is designed as symmetric structure with advantage of stable operation, high accuracy and large output power. Negative direction rotate can be obtained by changing piston installing position.②挤压的优质铝合金缸体，经精密加工的内孔和外部表面进行硬质阳极氧化处理（特殊情况下阳极氧化+特氟隆涂层），使用寿命更长，摩擦系数低。 Extruded high quality aluminum alloy, precisely machined inner bore and anodic oxidation treatment of outside surface (anodic oxidation treatment and teflon coating is applied under special circumstances) ensure a long working life and small friction factor.③一体式设计，所有的双作用和单作用执行器型号，都具有相同的缸体和端盖，很方便通过加装弹簧或拆除弹簧来改变作用方式。 Integral design makes sure that all double and single action actuator uses the same cylinder and end cover. Action type can be changed conveniently by adding and removing spring. ④组合式预符荷安全弹簧组，不论在装配过程或使用现场中，都能方便而安全的安装或增减弹簧数量。 Combined preloading safety spring can add and remove spring in both installing process and using site.⑤外部侧面两个单独调节螺钉对于已安装在阀门上的执行器更是精确方便，调节阀开和阀关位置，如需全行程调节时则另外在两个端盖处配置较长调节螺钉。 Independent control spring on side of the outside improve precision of actuator installed in valve. It is used to adjust valve opening and position. In case stroke control is needed, two longer turning screws should be installed in two another end cover.⑥多功