Application2.pptVIP

(a): Achieve ZVS (b): Achieve ZVS (c): no achieve ZVS How to achieve Zero-Voltage-Switch Champion Micro * R-L-C Component R-L-C Component R-L-C series circuit R-Leq R-Ceq (Characteristic Impedance) (Quality Factor) R-L-C series circuit Voltage versus Frequency Consider the system operator at the resonant point The voltage of the inductor and the capacitor ： Parameter of the R-L-C series circuit Let then So, The instantaneous energy stored in inductor and capacitor =? Quality Factor of RLC Series-Resonant Circuit Average power absorbed by the resistor Thus find the quality factor at resonance Quality Factor of RLC Series-Resonant Circuit Quality Factor of RLC Parallel-Resonant Circuit Let then So, The instantaneous energy stored in inductor and capacitor =? Quality Factor of RLC Parallel-Resonant Circuit Average power absorbed by the resistor Thus find the quality factor at resonance Characteristic impedance By magnetic theorem Lossless line (R=0,G=0) To ensure the ZVS operation for main switch, the energy stored in the resonant inductance must be greater than the energy stored in the resonant capacitance. Undamped Series-Resonant Circuit Undamped parallel-Resonant Circuit Series-Resonant Circuit with a capacitor-parallel load when Switching loss of the power device MOSFET Overlap Loss POWER MOSFET With loss Conduction Loss Zero-voltage/Zero-current-switching loci without dissipative snubbers reduce switch stress reduce the overall switching power loss reduce the EMI noises high efficiency Zero-voltage/Zero-current-switching loci High efficiency power converter Quasi-resonant 1. asymmetrical half-bridge converter 2. active clamp-forward converter with active clamp reset 3. zero-voltage-switching half-bridge converter 4. active clamp-flyback converter 5. phase-shift full-bridge converter Resonant 1.serise resonant converter 2.parallel resonant converter 3.serise-parallel resonant converter 低 50-