ICS77.140.10;77.140.50.docVIP

ICS77.140.10;77.140.50 H 46 National standard of the People’s Republic of china GB/T 1591—2008 Supersedes GB/T 1591-1994 High Strength Low Alloy Structural Steels 点击此处添加标准英文译名 点击此处添加与国际标准一致性程度的标识 Issue date: 2008-12-06 Implementation date: 2009-10-01 Issued by General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China Foreword This standard has been prepared by revising GB/T 1591-1994 High strength low alloy structuaral steels and referring to EN10025:2004 Hot rolled products of structural steels. This standard supersedes GB/T 1591-1994 High strength low alloy structuaral steels. Compared with the previous version, changes are made as follows: ?Expanded applicable scope; ?Added strength grade Q500, Q620, Q690 and cancelled strength grade Q295; ?Modified the requirements for chemical composition of steel products, requiring some serious control to some harmful elements such as P and S. ?Added the requirements for CEV and Pcm and their corresponding calculation formulas of CEV and Pcm. ?Modified the delivery condition of steel products and cancelled the requirements for quenched and tempered steel products. ?Modified the requirements for the values of mechanical properties and thickness range, making clear that the yield strength in text refer to the lower yield strength. ?Increased the specified impact absorbed energy value. ?Added the requirements for through-thickness characteristics of steel products. This standard was proposed by China Iron and Steel Association. This standard is under the jurisdiction of National Standardization Technical Committee of Steel. This standard was drafted by Angang Steel Co., Ltd, China Metallurgical Information and Standardization Institute, Jigang Group Co., Ltd, Shougang Group, Shagang Group Co.,Ltd, Hualing Lianyuan Iron and Steel CO.,Ltd. The main drafters of this standard: Liu Xuyuan, Piao Zhimin, Wang Xiaohu, Gao Ling, Wang Liping, Huang Zhengyu, Zhou J