减速器箱体(三)侧面双面钻孔组合机床设计【毕业论文+CAD图纸全套】.doc

宁XX大学 毕业设计(论文) 题目 减速器箱体(三)侧面双面钻孔组合机床设计 学生姓名 学 号 指导教师(签字) 摘 要 本论文主要说明组合机床设计的基本过程及要求。组合机床是按高度集中原则设计的，即在一台机床上可以同时完成同一种工序或多种不同工序的加工。组合机床发展于工业生产末期，与传统的机床相比：组合机床具有许多优点：效率高、、、、、Abstract This thesis mainly elucidates the basic process and requirements that design of the combination machine. Combination machine is designed according the fundamental , which highly centralized ,or , more correctly it can process one working procedure or more different working procedures at one time . Combination machine was developed in the end of