轴瓦定位唇专用铣床夹具设计【毕业论文+CAD图纸全套】.doc

摘 要 随着制造业对数控机床的大量需求以及计算机技术和现代设计技术的飞速进步，数控机床的应用范围还在不断扩大，并且不断发展以更适应生产加工的需要。我国汽车轴瓦制造技术水平仍较低。其制造工艺发展缓慢，加工装备落后，加工自动化水平低，提高轴瓦寿命和可靠性等技术攻关未能取得突破。Abstract With surging demand of numerical control machine, and the rapid advance so as satisfy the needs of the production and processing. In the processing of the existing is still relatively low level. The slow development of manufacturing technology, processing equipment is backward, processing the low level of automation, improve bearing life and reliability technology research has failed to make a breakthrough. Investigation of the subject in bearing bush positioning lip milling in home and abroad under the premise of understanding, analysis of the characteristics and the development tend of the technology, in this article. we present the overall design of the bearing efficiency. We are also based on finite element theory, the use of ANSYS, the dynamic analysis of the main shaft of bearing bush positioning lip milling was analyzed to verify the structural design is reasonalble and reliable. Bearing bush positioning lip milling in this article is one of the few types of bearing bush positioning lip milling both domestic and overseas at present, it belongs to there are no special lathes which are used to produce bearing bush in China. Moreover, it is expensive to import the same type lathes and the maintenance charge is very high. It is vitally necessary to design and produce special purpose machines by ourselves. Keywords positioning bearing bush lip, milling, structural design。 目录 摘 要 I Abstract II 第1章 绪论 1 1.1　课题研究的背景 1 1.2　国内外研究现状 2 1.2.1　国外研究现状 2 1.2.2　国内研究现状 5 1.3　主要工作内容 6 第2章 轴瓦定位唇铣床结构设计 8 2.1　工艺流程 8 2.2　总体设计的基本要求 9 2.3　总体结构布局 10 2.3.1　总体结构布局原则 10 2.3.2　方案的拟定 10 2.3.3　基本构成 11 2.4　总体结构及工作原理 12 2.4.1 总体结构 12 2.4.2 工作原理 13 2.5　运动和动力分析 15 2.5.1　运动分析 15 2.5.2　动力分析 16 2.3.2电动机功率计算 17 第3章 主要结构设计 18 3.1.1　滚珠丝杠的设计方案 18 3.1.2　机械手的设计方案 18 3.1.3　动力箱的设计方案 19 3.1.4　本章小结 20 第4章 三维软件分析 21 4.1 Solidworks软件介绍 21 4.2铣削状态研究