10米辊式输送机的设计【毕业论文+CAD图纸全套】.doc

优秀设计 摘 要 Abstract In this paper, it has introduced the roller sorting and transport features briefly, In addition it has simple structure, the operation credibility, The main content originally designed is to study the whole design process of the horizontal electronic actuator,the function of the electronic actuauor is,the executive body accepts the control information from controller and changes it into the organization of Regulation, then export. First of all,calculate according to the parameter outputted,elect the suitable Motor, calculate the transmission ratio,according to the transmission ratio and the characteristic of structure per transmission,then determine the best scheme.Then,confirm the systematic design plan,carry on detailed design and calculation to every running part.In order to realize the previous function,carry on the structural design.Later on,checked the main transmission and part,in order to meet the actual request.According to the calculated result, carry on drawing with Auto CAD,and carry on the structural concrete design,to make the structure simplify,rationalized,in order to process production. During the design process,complete the design with drawing,calculating and revising, finish the design of the whole installation diagram finally. Keywords: Roller Transporter Chain transmission 目 录 摘 要 I 1 概述 1 1.1 特点及应用范围 1 1.2 结构形式 2 1.3 运转方式及辅助装置 2 1.4 主要部件 2 1.4.1 辊子 3 1.4.2 驱动装置 3 1.4.3 机架 3 2 设计方案的拟定 5 2.1 方案的比较 5 2.1.1 传动方式的比较 5 2.1.2 辊子材料的比较 6 2.2 方案的确定 6 3 辊子机构的设计 7 3.1 原始数据 7 3.2 辊子的设计 7 3.2.1 辊子的长度 7 3.2.2 辊子直径 8 3.2.3 辊子间距 9 3.3 辊子处传动链的设计 10 3.4 辊子结构中轴的设计 22 3.4.1 轴的材料的选择 22 3.4.2 初步确定轴的最小直径。 23 3.4.3 轴的结构设计 24 3.5 轴承的选择 24 3.5.1 滚动轴承的主要类型.性能与特点 24 3.6 密封与润滑 27 3.6.1 轴承盖的设计 27 3.6.2 密封圈的选择 30 3.6.3 润滑 31 3.6.4其它零件的选择 31 4 传动装置的设计 32 4.1 电动机的选择 32 4.4.1摆线针轮减速器的承载能力计算 35 5 传动部分的设计 37 6 其它零部件的设计 46 6.1 机架的设计 46 6.1.1 机架的分类及特点 46 6.1.2 机架设计的一般要求 47 6.1.3 机架设计的方法和步骤 48 6.1.4 机架结构设计的基本要求 49 6.1.5 输送机机架的设计 49 6.2 支座的设计 51 7 辊