DG500型圆管带式输送机设计【毕业论文+CAD图纸全套】.doc

摘 要 DG500型圆管带式输送机是一种新型的辅助运输设备。该型主要应用于 ABSTRACT DG500 pipe belt conveyor is a novel type of auxiliary transport equipment. It is designed to transport flour between the two workshops. Besides, it can be used to transport the clean and fast continuous short-range particles items. DG500 pipe belt conveyor mainly composed of electric drum, couplings, bend pulley, belt, roller, frame, tensioning device, cleaning device and feed system components. The bearing segment and return segment of this type of conveyor is complete closed transport. This characteristics can prevent transportation of materials from external debris. Meanwhile, it can prevent materials from rain and sun. So, in principle, this type of conveyor can avoid leakage, spilled materials, etc, and can meet the environmental requirements. DG500-type pipe belt conveyor transportation volume is large, and can finish the transportation volume of 100t / h, and through replace the rack, it can be used to tilted, vertical, turning transport which is the common mode of transport can not complete. This type of conveyor has the feature of compact in frame, approximately symmetrical arrangement of structure; transmission distance is short, easy movement; smooth running, safe and reliable, and easy installation. Keywords: conveyor; closed transport; 目 录 1概述 1 1.1封闭输送带式输送机的分类 1 1.1.1 圆管带式输送机 1 1.1.2 吊挂带式输送机 3 1.1.3 异型截面带式输送机 4 1.1.4 各种密闭输送带式输送机的特点对比 5 1.2 圆管带式输送机的特点 6 1.2.1 优点 6 1.2.2 缺点 6 1.3 圆管带式输送机的发展 7 1.3.1 圆管带式输送机的发展水平 7 1.3.2 圆管带式输送机的理论研究 8 1.4 圆管带式输送机的组成 9 1.5 本文主要的工作 9 2 圆管带式输送机的总体设计 10 2.1 主体结构 10 2.2 机架组合形式 12 2.3 输送带 13 2.3.1输送带类型 13 2.3.2 成圆方式 15 2.3.3密封方式 16 2.3.4放置方式 16 2.4 托辊 17 2.5 机架 18 2.6 附加部件 18 2.7 驱动装置 20 2.8 启动系统 20 3 圆管带式输送机的总体计算 21 3.1 设计的条件 21 3.2 输送机横截面积A，带速v和管径D的计算 21 3.3 输送机功率的估算 22 3.4 张力计算 23 3.4.1 有效张力计算 23 3.4.2 最大张力计算 24 3.5 成圆损失 24 3.6 输送带下垂度 24 3.7 输送带层数 25 3.8 验算托辊载荷 26 4 输送带的选择与设计 28 4.1 输送带分类与结构 28 4.1.1 输送带的分类 28 4.1.2 输送带结构 29 4.1.3 带芯 30 4.1.4 编织方法对强度的影响 3