发动机配件生产线多工位工作台设计【毕业论文+CAD图纸全套】.doc

编号： 毕业设计说明书 题 目： 发动机配件生产线 多工位工作台设计 学 院： 机电工程学院 学生姓名： 学 号： 指导教师： 职 称： 题目类型： (理论研究 (实验研究 (工程设计 (工程技术研究 (软件开发 2014年 5月26日摘 要 本毕业设计是根据企业指定产品的加工需求，来设计一种与生产线匹配，符合加工技术要求的六工位工作台。本设计主要内容是选择并设计相应的机构，对总体布局，编制工作循环图。 关键词：六工位回转工作台；步进电机；定位；自锁； Abstract The graduation project base on the demand for the product processing enterprises designs a six processing stations workbench which designated to match the design of a production line and fit the technical requirement. The design of the main content is to select and design the appropriate agency, design a multi-position bench for the overall layout and draw the cycle diagram. The main task is to complete draw up the material on table of the work-piece, injection fluid coating, drying, cutting and other six processes, drying process takes three processes. The design requirements for cycle of single-piece production is 12s, craft processing time is not less than 2s. The six-station rotary table with stepper motor by controlling the stopping method to achieve transposition table and positioning, by controlling the input number and frequency of electrical pulses to achieve the angular displacement and speed table, by a stepping motor drive wheel to move the work-piece, the work-piece holder is rotated to the corresponding processing station. Because the stepper motor itself has a good self-locking function during machining of the work-piece, so the turntable occur rotated to ensure accurate positioning during the entire process, and so the process for the work-piece has a better quality. Keyword: Six-station rotary table; Stepper motors; positioning; self-locking;  目 录 1 绪论 1 1.1 回转工作台的研究背景及意义 1 1.2 回转工作台的历史、现状及应用 1 1.3 课题的主要任务 3 2 总体方案设计 3 2.1 原理方案的设计 3 2.2 动力的选择 5 2.3动力传动方式的选择 5 2.4轴承的选用 7 3 计算分析 8 3.1工作台回转运动规律分析 8 3.2步进电机启动力矩的计算 9 3.3直齿圆柱齿轮的传动设计 10 3.3.1、选定齿轮类型、精度等级、材料及齿数 10 3.3.2、按齿面接触强度设计 10 3.