螺杆式紧压茶叶机的设计（含全套CAD图纸）【毕业论文+CAD图纸全套】.doc

目 录 摘要…………………………………………………………………………1 关键词………………………………………………………………………1 1 前言………………………………………………………………………2 1.1 设计的目的和意义………………………………………………2 1.2 茶叶加工现状和前景……………………………………………2 2 设计原理和设计方案……………………………………………………4 2.1 设计原理…………………………………………………………4 2.2 设计方案…………………………………………………………4 3 螺杆的设计计算…………………………………………………………7 3.1 螺杆的要求………………………………………………………7 3.2 螺纹副与螺纹的选择……………………………………………7 3.3 螺杆的设计计算…………………………………………………8 4 其它零部件的设计计算…………………………………………………14 4.1 弹簧的设计计算…………………………………………………14 4.2 圆头平键的设计计算……………………………………………17 4.3 模具部分的设计计算……………………………………………18 4.4 连接部分的设计计算……………………………………………19 4.5 推力球轴承的选择………………………………………………21 4.6 轴承的寿命计算…………………………………………………21 5 结论………………………………………………………………………22 5.1 该机械存在以下的问题…………………………………………22 5.2 该机械解决的问题………………………………………………22 5.3 小结………………………………………………………………22 参考文献……………………………………………………………………23 致谢…………………………………………………………………………23  螺杆式紧压茶叶机的设计 摘 要：本文分析我国茶叶加工现状，设计出一种紧压茶块加工机械。紧压茶大多为发酵砖茶,饮用前必须先将其掏碎后在锅中烹煮出茶叶汁味才可饮用。? 关键词：紧压茶；改进；螺杆；模具 Design of a Screw Type Compressing Machine for Tea ? Abstract: The article analyses the status quo of the tea manufacture in our country, that design a new clamping device for tea .This grows tea bears the preserve, drinks with both facilitates and the health, but also could maintain and enhance green teas original shape and the quality.It make the green tea through the special machine processed into small pieces of tightly compressed tea, don’t need after water autoclaved, keep the original shape and quality green tea, and can be processed into various shapes, green tea tightly compressed size differ with words, and the machined surface tightly compressed tea. Has the merit causes it to bring the very high attachment value, this topic design specially carries on the preliminary design and the research to this kind of machinery. And in the prototypical foundation, we have made the partial improvements. Keywords: Clamp Tea；Improve；Screw rod；Mold 1 前言 1.1 设计的目的与意义 我国是茶叶的原产地，也是世界第一大产茶国。目前，我国年产干茶80多万吨，其中绿茶就占60多万吨。全国有大中型茶