土木工程专业英语作者陈瑛3.2.LimitStateDesign课案.pptVIP

3.2 Limit State Design  Limit state design requires the structure to satisfy two principal criteria: ultimate limit state承载能力极限状态 serviceability limit 正常使用极限状态 Ultimate Limit State A structure is deemed to satisfy the ultimate limit state criteria if all design values of load effect combination荷载效应组合 are below the design values of bearing capacity承载能力calculated for the section under consideration. Ultimate Limit State structural collapse of all or part of the structure ( very low probability of occurrence) and loss of life can occur. Loss of equilibrium of a part or all of a structure as