深圳市荣盛达电子有限公司.docVIP

1.MECHANICAL ASSEMBLY:(UNIT:mm) A B C D E F G 35 MAX 34 MAX 4.0+/-0.5 33 MAX 22.5+/-0.5 0.8+/-0.1 5+/-0.5 REMARKS: 1.BOBBIN为EI-33(6+6)PIN,PIN1,4,5,7CUT OFF,PIN2焊锡后剪掉1/2,绕线前需在空BOBBIN上加1TS TAPE; 2.成品须真空含浸,所有进出线需加TFL TUBE,N1,N5需层间绝缘; 3.铁芯规格为EI-33,无须研磨,铁芯固定胶带:0.025X12mmX3Ts,铁芯结合处与线架结合处需点黑胶固定; 4.标签贴法如图示,字底朝PIN1-6; REV.3 2.SCHEMATIC: 3.WINDING: 3.WINDING TABLE: NO. MARGIN TAPE ITEM MATERIAL TURNS TAPE TEFLON TUBE REMARK PIN端2.5mm TOP端2.5mm START FINISH N1 2LX2TS 2LX2TS 3-2 0.5mmX1C(2UEW) (16+16)TS (1+3)TS YES YES 密 绕 N2 2LX2TS 2LX2TS 9-11 0.5mmX6C(2UEW) 3TS 1TS YES YES 密 绕 N3 2LX2TS 2LX2TS 10.11-12 0.75mmX3C(2UEW) 4TS 1TS YES YES 密 绕 N4 2LX2TS 2LX2TS 8-10 0.5mmX6C(2UEW) 3TS 3TS YES YES 密 绕 N5 2LX2TS 2LX2TS 2-5 0.5mmX1C(2UEW) (16+16)TS (1+3)TS YES YES 密 绕 4.ELECTRICAL CHARACTERISTICS:(AT 23℃+/-5℃;HUMIDITY:60%+/-10%): (1).INDUCTANCE: (1KHz 0.25V) (CHEN HWA 1061 LCR) L(3-6):10mH MIN (2).LEARKAGE INDUCTANCE: (1KHz 0.25V) (CHEN HWA 1061 LCR) (3).DC RESISTANCE: (CHEN HWA 502A) (4).HI-POT TEST: AC 50/60 Hz (CHEN HWA 901 HI-POT) APPLY AC 3600V/5mA BETWEEN PRI TO SEC FOR 3 SECONDS. APPLY AC 1800V/5mA BETWEEN PRI TO CORE FOR 3 SECONDS. APPLY AC 1800V/5mA BETWEEN SEC TO CORE FOR 3 SECONDS. (5).INSULATION RESISTANCE: (DC 500V) BETWEEN PRI TO SEC AND PRI TO CORE AND SEC TO CORE THE RESISTANCE STRENGTH IS MORE THAN 100MΩ. 5.MATERIAL LIST: NO. NAME MATERIAL SUPPLIER UL NO. 1 BOBBIN EI-33 T375J CHANG CHUN PLASTICS CO.LTD E59481 2 WIRE 2-UEW SHENZHEN DAYANG INDUSTRY CO.,LTD E176101 3 TAPE PZ,WF JINGJIANG YAHUA PRESSURE SENSITIVE GLUE CO.LTD E165111 4 CORE EI-33 TD4 TONGDA N/A 5 VARINISH T-4260 WU JIANG TAIHU INSULATING MATERIAL CO.LTD E228349 6 TUBE TFL GREAT HOLDING INDUSTRIAL CO LTD E156256 7 EPOXY 3300L DONGGUAN CITY HUMEN EATTO INSULATION MATERIAL FACTORY N/A 6.SAMPLE TEST DATE: INDUCTANCE LEAKAGE DC RESISTANCE 1KHz 0.25V 1KHz 0.25V AT 25℃ L(3-6) 10mH MIN 1 2 3 4 HI-P