一、静力分析.ppt

F P2 P1 L1 L2 L3 L4 L1 =15 mm; L2 =5 mm; L3 =10 mm; L4 =2.5 mm; Cross-sectional area=20 mm2; Height = 4 mm; Modulus of Elasticity, E=200 GPa; ν=0.29; P1 =1.2 MPa; P2=1MPa; F=100N 題目： 1. Set up 設定參數： (Unit: N-mm) 一、靜力分析 L1 =15 mm; L2 =5 mm; L3 =10 mm; L4 =2.5 mm; → Total Length, L= L1+L2+L3+L4 Cross-sectional area=20 mm2; → A = 20 mm2 Height = 4 mm; → Height, H= 4mm; Width, B= A/H = 5 mm Modulus of Elasticity, E=200 GPa; →200GPa=200E9 N/m2=200E3 N/mm2=200E3 MPa Poissons ratio ν=0.29; P1 =1.2 MPa; P2=1MPa; F=100N Element size, SIZE = 0.5 →定義元素切割的大小，設定0.5讓作用力作用在Node上 F