手锤说明书概要.doc

工程训练中心项目教学设计 多功能手锤设计 院系名称： 汽车工程学院 专业班级： 车辆工程 15-2班 学生姓名： 李可州 付宇 郭振宇 汪茂华 史乾 指导教师： 孙建华 职 称： 工程师 黑龙江工程学院工程训练中心 二○一六年十一月 摘 要 本论文是在手锤的使用理论指导下，通过对黑龙江省工厂手锤使用情况及手锤的实用性及工人在实际工作中除锤子以外其他工具被使用的可能性及使用率进行分析，最终形成这种综合羊角锤、汽车安全锤、螺丝刀、储物槽于一身的新型多功能手锤。它解决了工人在工作时由于工具不足可能导致的工作效率降低，以及工人在寻找工具时可能忘记关闭机器而机器继续运转造成的工人安全性降低的情况。于是我们便有了将羊角锤、汽车安全锤、螺丝刀、储物槽结合到手锤之中的设计理念。整个锤子分为锤头与锤柄两部分，其中锤头部分可砸钉子以及起钉子。锤柄由锤柄一与锤柄二组成，锤柄一内空心部分可放置可替换的螺丝刀、锤柄二可放置圆钉、螺丝钉、麻花钉等小型常用零件，并且锤柄而顶端与锤柄一相连接部分可换装不同类型的螺丝刀头，可做螺丝刀使用。锤柄尾部为一锥形凸起，可在乘车时打破玻璃可做汽车安全锤使用。最后分析了这款新功能手锤所需要的加工过程和工艺、所需材料价格、设备加工工时费及人工费进行了成本分析。 关键词：多功能；实用性；经济性；可能性 ABSTRACT This paper is used in theory under the hammer,Analysis of the possibility of practicality and use hammer and hammer factory workers in Heilongjiang Province in the actual work in addition to other hammer tools were used and usage,The final formation of this integrated claw hammer, car safety hammer, screwdriver, multifunctional hammer in a storage tank.It solves the problem that workers can reduce the efficiency of work due to the lack of tools in the work.As well as the workers in the search tool may forget to shut down the machine and the machine continues to operate caused by the safety of workers to reduce the situation.We have the car safety hammer, claw hammer, screwdriver, The hammer is divided into two parts of a hammer head and a hammer handle.Among them, the hammer to hit a nail and nail part.The hammer handle is composed of a hammer handle and a hammer handle two, a hammer can be placed inside the hollow part of the screwdriver can be replaced, the handle can be placed two nails, screws, nails and other small parts used for twist,and while the top with a hammer hammer handle connecting parts can be changed for different types of screwdriver, can be used as a screwdriver，The tail part of the hammer handle is a cone convex,can be in the car when the car safety hammer t