WELCOME TO THE COURSE WORK STUDYIE 341欢迎您到本课程工作学习即341.pptVIP

WELCOME TO THE COURSEWORK STUDY(IE 341) OFFERED BY SAYED ALIUL HASAN RIZVI, PhD PROFESSOR DEPT OF INDUSTRIAL ENGINEERING KING ABDULAZIZ UNIVERSITY, JEDDAH INTRODUCTION With increasing complexities of the technological world,need to simplify the work system has been increasing day by day. Work study is an area of knowledge that addresses the problem of work simplification with the basic objectives of PRODUCTIVITY ENHANCEMENT, and HUMAN COMFORT SAFETY “WORK STYDY” HAS MANY OTHER NAMES FOR EXAMPLE METHODS ENGINEERING, WORK SCIENCE, WORK DESIGN, JOB ESIGN WORK METHODS DESIGN WORK MEASUREMENT MOTION TIME STUDY Original names were: Motion study,Time Study then, Motion Time Study DEFINITION It is the systematic study of work systems with the purposes of Developing the preferred system and Method ( with lowest cost) 2. Standardizing this system and method 3. Determining standard time for the task 4. Assisting in training the worker in the preferred Method EXPLANATION Above stated definition has FOUR parts. However, the TWO most important for WORK STUDY are: 1.MOTION STUDY (or Work Methods Design) 2. TIME STUDY (or Work Measurement) ILO DEFINITION It is the systematic examination of carrying on activities so as to improve the effective use of resources and to set standards of performance for the activities being carried out. LECTURE : 3-4CHAPTER : 2WORK STUDY PRODUCTIVITY HUMAN’S BASIC NEEDS PRODUCTIVITY In 1950: world population was 2.5 b Now : it is of the order of 6.5 b 90% increase has occurred in developing nations. CONTD. Out of these people, more than 1 b are below poverty line, struggling for the BASIC NEE