INTERRUP中断说明.docVIP

INTERRUP中断说明 @Interrupt Services DOS鵅IOS鵈MS鵐ouse :int table:interrupt table:exceptions:irq ^Intel Defined CPU Exception Table (see notes) %Interrupt Function 0 Divide by zero 1 Single step 2 Non-maskable (NMI) 3 Breakpoint 4 Overflow trap 5 BOUND range exceeded (186,286,386) 6 Invalid opcode (186,286,386) 7 Coprocessor not available (286,386) 8 Double fault exception (286,386) 9 Coprocessor segment overrun (286,386) A Invalid task state segment (286,386) B Segment not present (286,386) C Stack exception (286,386) D General protection exception (286,386) E Page fault (286,386) F Reserved 10 Coprocessor error (286,386) ^IBM PC Hardware Interrupt Table (in order of priority) %IRQ# Interrupt Function IRQ0 8 timer (55ms intervals, 18.2 per second) IRQ1 9 keyboard service required IRQ2 A slave 8259 or EGA/VGA vertical retrace IRQ8 70 real time clock (AT,XT286,PS50+) IRQ9 71 software redirected to IRQ2 (AT,XT286,PS50+) IRQ10 72 reserved (AT,XT286,PS50+) IRQ11 73 reserved (AT,XT286,PS50+) IRQ12 74 mouse interrupt (PS50+) IRQ13 75 numeric coprocessor error (AT,XT286,PS50+) IRQ14 76 fixed disk controller (AT,XT286,PS50+) IRQ15 77 reserved (AT,XT286,PS50+) IRQ3 B COM2 service required, (COM3-COM8 on MCA PS2) IRQ4 C COM1 service required IRQ5 D fixed disk or data request from LPT2 IRQ6 E floppy disk service required IRQ7 F data request from LPT1 (unreliable on IBM mono) ^Interrupt Table as Implemented by System BIOS/DOS %INT # Locus Function 0 CPU divide by zero 1 CPU single step 2 CPU non-maskable 3 CPU breakpoint 4 CPU overflow t