AVL_Fuel_Balance-komp讲解.pptVIP

Content AVL Product Portfolio Inluence of the fuel temperature stability to the measurement uncertainty AVL Consulting Service The AVL Benefit The AVL Benefit Direct Mass Flow Measurement Open system - negative flows possible On-board calibration High stability of the fuel temperature Measurement- and conditioning system in one cabinet Adjustable circulation flow rates Measurement range from 0.02...500 kg/h Short measurement times at very low flow rates Product Overview - Flowmeters Temperature gradient influence to Measurement Accuracy AVL Fuel Balance / Cooling System (733S / 753CL) Measurement range: 0...150kg/h Pump flow rate: 250/500l/h Actual Fuel Temperature via RS232C or analog Determination of the temperature gradient in the measurement circuit AVL Fuel Balance and Fuel Temperature Control Measurement range: 0...150kg/h (range 225/450/900/1800g) Pump flow rate: 250/500l/h Actual Fuel Temperature via RS232C or analog Set temperature: 10...80°C Temperature stability: +/-0.02°C Standard uncertainty of the Fuel Balance calibration 0.06% Standard uncertainty due to scatters of the Fuel Balance resp. influences in the measuring circuit such as: Temperature variation Pressure pulsation Vapour lock formation Consumption variation of the unit under test Evolution through product vision Consulting Service Support for Design of Fuel Systems Experts for Fuel Consumption Measurement Application Know How Optimization of Cost-Performance Ratio Scope of work · On-site analysis and evaluation of customer requirements and application · Analysis and judgement of infrastructure in the test cell · Design of fuel pressure supply · Design of hydraulic circuit · Design of conditioning system (heating cooling) · Integration in the test bed environment · Design of Interfaces (hard- software) Benefits for Consulting Service Best achievable measurement uncertainty Responsibility for the total fuel system which considers all relevant influences of fuel measurement