firestonetpoinvertedroofingsystem.doc

  1. 1、本文档共12页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
firestonetpoinvertedroofingsystem

Firestone TPO Inverted Roofing System The specifications herein described are general guidelines created from information provided to Firestone Building Products by project specifiers and design professionals. They are intended to facilitate and assist in the selection of roof materials, not as a substitute for the judgment of a design professional. The ultimate selection of a specification for a particular roof remains the responsibility of the building owner and their design professionals. When a Green Roof and/or Photovoltaic System will be installed on top of this Firestone TPO Roofing System, we refer to our specifications for TPO Roofing Systems for Extensive/Semi-Intensive Green Roofs and/or Enviro-Ready Roofing Systems. Preparation of the Substrate New Roof General Roof slope should be a minimum of 2% to allow for adequate drainage of the roof taking into account the deflection of the roof. The roof surface will be made clean, dry, smooth and free of contaminants such as grease, animal fats, coal tar and oil based products. All sharp edges, fins and rough surfaces that could damage the membrane will be removed or if they cant be removed, isolated from the membrane with a leveling layer. It is essential that the roof structure is capable of supporting the imposed load of the new roofing system. When necessary, the advice of a Structural Engineer should be sought in this respect. Substrate Type: Metal Decking Metal decks require a minimum thickness of 0.75 mm for galvanized steel. Deck should be installed without inducing stresses (over-stretching/compressing) that could cause the flutes to bend. The deck should be fixed to the substrate using sufficient fasteners as per the manufacturers specifications. Substrate Type: Wooden Decks The deck needs to consist of wooden boards with a minimum thickness of 18 mm. Thickness of the boards depends on the distance between the purlins. Wooden panels should be kept dry before and during the waterproofing works.

文档评论(0)

jvdodnnv002 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档