qpseriessubmersiblesewagepump.docVIP

QP series submersible sewage pump Technical parameters Flow rate: up to 3000 m3 / h Head: up to 50m Maximum medium temperature: 40 ℃ Power: up to 250KW Material: Cast Iron / 304 SS / 316 SS Use: Rose water station Municipal wastewater treatment plant Septic tank drainage system Agricultural livestock wastewater treatment system Hospitals, schools, communities, and other domestic wastewater treatment system Food, paper, mining, textile, leather, chemical plants and other industrial water treatment systems Water treatment system 2． SV Series vertical multistage centrifugal pump Technical parameters Flow rate: up to 180 m3 / h Head: up to 300m Medium temperature range: -15 - 120 ℃ Power: up to 75KW Material: 304 stainless steel / 316 Stainless Steel Market areas: Civil, agricultural, light industry, water treatment, heating and air conditioning Application: 1) does not contain suspended solids conveying civil, industrial and agricultural water 2) pressurized water supply 3) irrigation 4) Cleaning System 5) Water Treatment 6) transport medium corrosive liquids, soft water and ethylene glycol, and other media7) heating, cooling and air conditioning systems heat cold water cycle. 8) boiler feed water 3． SP Series stainless steel submersible pump Technical parameters Flow rate: up to 1100 m3 / h Head: up to 500m Maximum medium temperature: 90 ℃ Power: up to 250KW Material: Cast Iron / 304 SS / 316 SS Uses:LOWGE stainless steel submersible pumps used in extraction between the PH value 2-10, sediment less than 200 grams / cubic meter, water temperature of 0 degrees -90 degrees of non-solid medium. It is widely used in building water supply, agriculture irrigation, RO reverse osmosis systems, mining, marine platforms, landscape design, geothermal hot springs, underground water from deep well extraction, and other industrial water uses. 4． VF Series Pipeline Pump Technical parameters: Flow rate: up to 900 m3 / h Head: up to 130m Medium temperature range: