resourceconservationopportunities.docVIP

Resource Conservation Opportunities Detailed Descriptions KEY Op = Operational Ma = Maintenance RC = Resource Conservation Measure (capital project) This is an annotated listing of the measures found on the Resource Conservation Audit form. These descriptions coincide with the Resource Conservation Audit form. OCCUPANCY Op Move after hour activities to a more efficient facility Op Reschedule after hour activities to a limited number of days Op Cluster after hour activities into one HVAC zone Op Reschedule custodial activities to overlap working hours I. BUILDING ENVELOPE 1. RC Install double glazing Replace single glazing with new double-glazing. This is usually not cost effective from an energy standpoint, unless infiltration is excessive. If single glazing is in good condition and there is little to no infiltration, consider a storm window. Efficient good and quality interior storm windows are available and can be cost effective. An integral mini-blind can also be incorporated. This will reduce solar gain and will reduce maintenance of dusty and abused blinds. 2. RC Infill glazing* For buildings with large areas of windows or windows combined with uninsulated panels, a partial infill is recommended. All opaque panels should be insulated. The remaining window are should be replaced with new double-glazing. The size and number of operable windows will need to be determined. The reason for the large amount of infill is cost effectiveness. A double pane window provides an R-value of about 1.5 to 2.0. Although a large improvement over single pane windows, it still allows for a large heat loss. A 2 x 6 wall with R-19 insulation provides an overall R-value of over R-15 (lowered due to framing). Consult an architect to determine the best design that will not negatively impact the aesthetics of the building. Keep in mind natural light is beneficial to occupant performance, so try to maintain a day-lighting strategy. 3. RC Add