A novel contact force model for the impact analysis of structures with coating and its experimental verification.pdfVIP

Mechanical Systems and Signal Processing 70-71 (2016) 1056–1072 Contents lists available at ScienceDirect Mechanical Systems and Signal Processing journal homepage: /locate/ymssp A novel contact force model for the impact analysis of structures with coating and its experimental verification Dengqing Cao a,n, Yang Yang a, Huatao Chen a, Deyou Wang b, Guangyi Jiang b, Chenggang Li b, Jin Wei a, Kun Zhao a a School of Astronautics, Harbin Institute of Technology, PO Box 137, Harbin 150001, China b Shenyang Engine Design and Research Institute, Aviation Industry Corporation of China, Shenyang 110015, China a r t i c l e i n f o a b s t r a c t Article history: A novel hysteretic force model is proposed to describe the contact force for the impact Received 5 February 2015 analysis of the rotor blade and casing of an aero-engine in this article. Firstly, the Received in revised form structural stiffness of both the flexible blade and casing, as well as the local stiffness of 17 April 2015 coating painted on both the blade tip and casing are taken into consideration in the Accepted 18 August 2015 formulation of the impact stiffness. Moreover, energy loss during the process of impact is Available online 8 September 2015 expressed by introducing the nonlinear hysteretic damping. Then, the hysteretic impact Keywords: force model for both soft and hard coating is obtained. In order to estimate the values of