宝洁安全培训教材剖析.ppt

Construction Safety施工安全 1.施工安全方针1.Construction Safety Policy 没有任何的事情值得任何人受到伤害. Nothing is worth getting anyone hurt. 安全能够被管理. Safety can be managed. 任何事故都是可能及应该被预防的. Every incident could and should have been prevented. 安全是每个人的责任. Safety is everyone’s responsibility. 2.PG 安全工作程序2.PG Work Procedure of Safety 进场安全培训. Safety orientation. 确定工作并完成安全风险分析. Risk analysis of safety before starting work. 提交施工方案并得到作业许可. Submit work plan get work permit. 检查和记录. Check and Record. 3.Entering site3.进入现场 进场前每个人必须明确安全组织机构. The organization chart must be shown to every construction personnel before start work. 现场紧急逃生及报警. On-site emergency escape call. 警报 集合点 清点人数 Alarm Assembly Area Personnel checking 报警电话:火警119;急救120;匪警110;宝洁火警电话5000 Emergency call:Fire119;First-aid120;Police110; PG fire call:5000 急救箱和急救员 First-aid kit first aid personnel 现场紧急疏散计划 On-site emergency escape plan 在现场必须佩戴个人防护设备. PPE must be worn at construction site 进入施工区域必须佩带安全帽、安全眼镜、安全鞋及穿工作服 Personnel must wear hard hat , safety glasses , shoes as well as uniforms. 在潜在跌落高度1.2m以上部位施工时必须系全身式双钩安全带. Full body harness with 2 hooks shall be worn when working above 1.2m. 安全管理人员戴白色安全帽，安全管理人员安全帽上必须有显目的“十”字标签；急救人员需有显著标识. Safety officer wear white hard hat. There must be a obvious symbol of cross on hard hat of safety officer. first aid personnel must wear obvious symbol 电气、焊割施工必须戴阻火长手套和护目镜 Long fire prevented glove and safety goggles shall be worn during electricity and welding-cut constructions. 在尘埃、烟气中施工的员工必须戴口罩 Gauze mask should be worn when working in dust and smoke 在噪音超过85分贝区域施工时,或者在头顶部位烧焊施工,必须戴耳塞 Earplug will be worn in construction area where DB beyond 85, Welder shall wear earplug in overhead welding process. 4.工作许可证制度4.Work Permit System 5.开挖工作 5.Excavation Work 6.防火6.Fire Prevention 7. 压缩气瓶7. Compressed Gas Cylind