第五章4 McBSP_v104.pptVIP

Copyright ? 2003 Texas Instruments. All rights reserved. DSP C5000 Chapter 9 Understanding and Programming the Multi-channel Buffered Serial Port (McBSP) Outline Application of McBSP McBSP = Multichannel Buffered Serial Port Direct interface to industry-standard codecs, analog interface chips (AICs), and other serially connected A/D - D/A and serial devices. Direct connection to other C5000 devices, Usually works in connection with DMA Audio System using DMA and McBSP Ping-Pong Buffers The Flow 1 of 4 The Flow 2 of 4 The Flow 3 of 4 The Flow 4 of 4 McBSP on C5416 and C5510 C5416 and C5510 McBSP are very similar The small differences will be discussed in a later section 3 McBSPs on C5416 and C5510 Basic pins on serial ports (R for Read and X for Transmit): BDR or BDX: serial data BCLKR or BCLKX: clock at bit rate BFSR or BFSX: frame synchronization (word rate) Multi-Channel Buffered Serial Port (McBSP) Full duplex, max bit rate = ? CPU clock Word length: 8, 12, 16,20, 24, 32 Frame length (between FS): 1-128 words McBSP Interface Signals More Features of the McBSP 1 of 2 Double-buffered transmission and triple-buffered reception Independent clocking and framing for transmit and receive. Capability to send interrupts to the CPU and DMA event to the DMA controller. External shift clock generation or an internal programmable-frequency clock Highly programmable internal clock and frame generation Programmable sample rate generator 128 channels. More Features of the McBSP 2 of 2 Programmable polarity for both frame synchronization and data clocks 8-bit data transfers with option of LSB or MSB first ?-Law and A-Law companding Bit Ordering Normally, transfers using the McBSP are sent and received with the MSB first. Certain 8-bit data protocols (that do not use companded data) require the LSB to be transferred first: By setting (R/X)COMPAND = 01b in (R/X)CR2, the bit ordering of 8-bit words is reversed (LSB first) . This feature is only enabled if the appropriate (R