DFID介绍.ppt

Thank you for your attention ! Analyzers and Process Instrumentation ? Presentation Model 3006 ? 17.04.2002 ? Page * Portable Heated VOC Analyzer Model 3006 FID 3006 总烃测试仪 2011-3-3 特殊的结构与高质量材料的结合, 如 钛板融入独一无二的结构 ... VOC总烃分析仪FID 3006就像左边的建筑 一样引人注目 应用 FID（ flame ionisation detector ）3006 是一种便携式的总烃测试仪。 FID3006 被设计成便携式。既可以应用于连续监测，也可以短时间的碳氢化合物的测量。这样的结构可以应用比较困难的测点，可以应用于实验室这样的苛刻条件下。 外排监测 FID 3006 经核准适合相关国家的准入标准 例如：Method 25a of the US Environmental Protection Agency. FID 3006 测量 % 和 ppm 水平浓度的总烃。 FID3006 可以测试引擎燃烧废气，实验室废气等。 应用 工厂监测 必须测试工作区域气体成分。 85%有毒工作环境需要用FID3006测量。 应用 过程监测 FID 3006 可以监测低爆炸极限、高温熔解气，并且在几秒钟内做出调整，停机, 烘干，或者启动其它气体循环系统，也可以在几秒钟内监测漏气情况。 应用 测量原理FID ( flame ionisation detector ） We use two electrodes with a distance approx. 1 cm. Between the electrodes is clean air which is a good isolation against electrical current ... An amplifier with very high current sensitivity and a readout is connected to one of the electrodes ... To the other electrode a polarisation voltage of several hundreds of Volts isconnected. Because the clean air between the electrodes is a good isolation,no current is in existence within the circuit. In the next step, we lead a jet of flamebetween the electrodes. The thermal energy of the flame achieves an ionisation between the electrodes, and a low current named basic ionisation current with several pA is in existence. The flame is burnt in clean air, named combustion air,by means of hydrogen (or H2He) as fuel gas. The first portable heated hydrocarbon analyzer in the world, the model 3005, was developed by three people at BERNATH ATOMIC in 1979. More than 2,000 instruments were sold from 1979 to 1994. All user information about measuring practice was taken into consideration when developing the new Model 3006. more than 20 yearsof experience two thousand customers 便携式 FIDs的历史 新FID 3006 样子  携带两个部分比携带一个整体要简单。 两个独立的部分：1、分析设备，2、气瓶框架。 FID 3006 包含两个较轻的部分。 1、分析箱 ，2、气瓶框架减压阀。 两部分可以轻易的组合在一起而且不需要任何工具。 气瓶和减压阀都在架子上固定，架子有便携的手柄。 Bet