sendaunicastpacket.pptVIP

How to send a unicast packet? Procedure Roughly takes the following path (when no errors or congestion): recv() - send() - sendDATA() and sendRTS() - start defer timer - deferHandler() - check_pktRTS() - transmit() - recv() - receive timer started - recv_timer() - recvCTS() - tx_resume() - start defer timer - rx_resume() - deferHandler() - check_pktTx() - transmit() - recv() - receive timer started - recv_timer() - recvACK() - tx_resume() - callback_ - rx_resume() - done! recv ( ) void Mac802_11::recv(Packet *p, Handler *h) { struct hdr_cmn *hdr = HDR_CMN(p); //获取packet的头部，句柄 assert(initialized()); if( hdr-direction() == hdr_cmn::DOWN ) { send(p, h); return; } if(tx_active_ hdr-error() == 0) { hdr-error() = 1; } if(rx_state_ == MAC_IDLE) { setRxState(MAC_RECV); pktRx_ = p; mhRecv_.start(txtime(p)); } else { ……………………………………………………………………………………… } } back to procedure send( ) void Mac802_11::send(Packet *p, Handler *h) { double rTime; struct hdr_mac802_11* dh = HDR_MAC802_11(p); EnergyModel *em = netif_-node()-energy_model(); if (em em-sleep()) { em-set_node_sleep(0); em-set_node_state(EnergyModel::INROUTE); } callback_ = h; sendDATA(p); sendRTS(ETHER_ADDR(dh-dh_ra)); dh-dh_scontrol = sta_seqno_++; if(mhBackoff_.busy() == 0) { if(is_idle()) { if (mhDefer_.busy() == 0) { rTime = (Random::random() % cw_) * (phymib_.getSlotTime()); mhDefer_.start(phymib_.getDIFS() + rTime); } } else { mhBackoff_.start(cw_, is_idle()); } } } back to procedure if((u_int32_t)ETHER_ADDR(dh-dh_ra) != MAC_BROADCAST) { /* store data tx time for unicast packets */ ch-txtime() = txtime(ch-size(), dataRate_); dh-dh_duration = usec(txtime(phymib_.getACKlen(), basicRate_) + phymib_.getSIFS()); } else { /* store data tx time for broadcast packets (see 9.6) */ ch-txtime() = txtime(ch-size(), basicRate_ ); dh-dh_duration = 0; } pktTx_ = p; } sendDATA( ) Mac802_11::sendDATA