底吹炉处理锌浸出渣工艺设想讲义.docVIP

底吹炉处理锌浸出渣工艺设想 河南豫光金铅股份有限公司 河南济源 454650 ［摘要］目前主流的湿法炼锌工艺对产出的浸出渣采用回转窑挥发法处理存在成本高、焦耗大、有价金属回收率低等诸多缺点，有待开发新的工艺装备及工艺进行更新换代。本文论述采用底吹熔池熔炼工艺处理湿法炼锌浸出渣工艺过程及其原理，并对关键工艺要点展开讨论，并与常规回转窑挥发法处理工艺进行比较，确定了采用底吹熔池熔炼工艺处理浸出渣的可行性。 ［关键词］湿法炼锌；浸出渣；回转窑；底吹炉；熔池熔炼；工艺设想 Technology idea on treatment of leaching residue of zinc hydrometallurgy by bottom-blown furnace abstract:Current mainstream hydrometallurgy of zinc leaching residue by rotary kiln volatilization method has many disadvantages such as high treatment cost, high coke consumption and low metal recovery, pending the development of new technology and equ