0KV變电站设计稿毕业设计稿专业论文.docVIP

河南机电高等专科学校 毕业设计论文 论文题目：110KV变电站设计 系 部： 电气工程系 专 业： 供用电技术 班 级： 2012级01班 学生姓名： 李冲 学 号： 120315101 指导老师： 常文平 童新 2014年12月日 摘 要 电力工业为现代化生产提供主要动力，电力科学的发展和广泛应用，对我国工农业的迅速发展及人民生活的提高起到了巨大的作用和深远的影响。?而变电站是汇集电源、升降电压和分配电力的场所，是发电厂和用户联系的中间环节。为满足工业发展的需要,设计一座110KV变电站，以10KV向附近的工厂供电。变电站安装两台变压器，一次建成。设计要求采用两回110KV进线，10KV出线10回，基于上述条件，变电站的设计在满足国家设计标准的基础上，尽量考虑当地的实际情况。在本变电站的设计中，包括对变电站总体分析和负荷分析、变电站主变压器的选择、主接线、短路电流计算等部分的分析计算以及防雷设计。在保证供电可靠性的前提下，减少事故的发生，降低运行费用。 关键词：变电站设计；主接线；设备选择；防雷计算 ABSTRACT The electric power industry to provide the main impetus for the modernization of production, development and wide application of the power of science, the rapid development of industry and agriculture of our country and peoples life improved played huge role and far-reaching influence. And the substation pooling power, lifting voltage and distribution of electric power of the place, is a middle link of power plant and customer contact. In order to meet the needs of industrial development, design a 110KV substation, uses 10KV to nearby the factory power supply. The installation of two sets of transformer substation, a built. The design requirements using two 110KV back into line, 10KV outlet 10 back, based on the above conditions, the substation design based on meeting the national design standards, as far as possible to consider the actual situation of the local. In the design of the substation, including calculation and analysis of substation overall analysis and load analysis, the selection of main transformer, the main wiring, short-circuit current calculation portion and lightning protection design. Under the premise of ensuring the reliability of power supply, reduce the occurrence of accidents and reduce the operation cost. Keywords: the design of the substation ；main wiring； The choice of equipment；Preventing lightning calculation 目 录 摘 要 I 绪 论 1 第1章 变电站概述 2 1.1 变电站的组成分类 2 1.2 变电站的工作原理 2 第2章 变电站总体分析 4 2.1