CCD的圖像采集软件系统的设计稿与实现硕士学位专业论文.docxVIP

III implement. Final, the test of the systems hardware and software. The test results show that the design achieved the acquistion function and good performance. At the same time, the system achieved the expected acquisition speed and quality of the collected image. Keywords: Scanner, CCD, Man-machine interface, Multithread, Memory managementII ABSTRACT The Multi-CCD scanners which are widely used in printing, scientific research, medical and other fields have important applications in optical-electronic-machinery integration equipment. At present, with the rapid development a lot of industries need to archive large format materials. Therefore, the demand for large-format scanner is increasing, while promoting the development and production of large format scanners. The main work of the large-format scanner is to convert the analog signal to the digital signal which the computer can identify after converting the images optical signal to the analog signal. In order to scan large format images, an effective approach is to capture images through multiple sensors, then splice the image to complete the large-format scanners work. The scanner use four same type CCD to capture the images then splice them into one. While the four CCDs scan asynchronously to accomplish the photoelectric conversion in the process. The main work of this paper can be divided into two parts, hardware and software design. The first part is the hardware work, after analyzing the large format scanners working principle and hardware systems performance parameters the development content and focuses of the work of large-format scanner has been determined. The devices have been selected according to the parameters. Then we finished the scanner hardware circuit design and FPGAs timing design including the driver and configuration of the digital-to-analog conversion chip. This is the important factor to the image quality. Converting the optical signal to the analog signal laid a foundation to enhance im