TooltocalculateprojectorleakageCO2emissionsfromfossil.PDFVIP

UNFCCC/CCNUCC CDM – Executive Board EB 41 Report Annex 11 Page 1 Methodological tool “Tool to calculate project or leakage CO2 emissions from fossil fuel combustion” (Version 02) I. SCOPE, APPLICABILITY AND PARAMETERS Scope and applicability This tool provides procedures to calculate project and/or leakage CO2 emissions from the combustion of fossil fuels. It can be used in cases where CO2 emissions from fossil fuel combustion are calculated based on the quantity of fuel combusted and its properties. Methodologies using this tool should specify to which combustion processj this tool is being applied. Parameters This tool provides procedures to determine the following parameters: SI Unit Description Parameter PE tCO /yr CO emissions from fossil fuel combustion in processj during the year y FC,j,y 2 2 II. BASELINE METHODOLOGY PROCEDURE CO2 emissions from fossil fuel combustion in processj are calculated based on the quantity of fuels combusted and the CO2 emission coefficient of those fuels, as follows: PE = ∑FC × COEF FC,j, y i,j, y i, y i