物理公式技解答.doc

Abstract: Based on the comprehensive analysis on the plastic part’s structure service requirement, mounding quality and mould menu factoring cost. A corresponding injection mould of internal side core pulling was designed. By adopting the multi-direction and multi-combination core-pulling. A corresponding injection mould of internal side core pulling was designed, the working process of the mould was introduced 高中物理公式、规律汇编表 一、力学公式 胡克定律： F = Kx (x为伸长量或压缩量,K为倔强系数，只与弹簧的原长、粗细和材料有关) 重力： G = mg (g随高度、纬度、地质结构而变化) 3 、求F、 Ｆ＝ 　 合力的方向与F1成(角：