[精品]STK621-140.pdfVIP

61108HKIM No. A1033-1/8 STK621-140B-E Overview The STK621-140B-E is 3-phase inverter power hybrid IC containing power elements, pre-driver, and excessive temperature protection circuit. Applications ? 3-phase inverter motor drive. Features ? Protective circuits including overcurrent (bus line), and pre-drive low voltage protection are built in. ? Direct input of CMOS level control signals without an insulating circuit is possible. ? The temperature monitor is enabled through the use of an internal thermistor. ? Single power supply drive is possible through the use of a built-in upper-side power-supply bootstrap circuit (capacitor is externally connected). ? Built-in simultaneous upper/lower ON prevention circuit to prevent arm shorting through simultaneous ON input for the upper and lower side transistors. (Dead time is required for preventing shorting due to switching delay.) ? SIP (The single in-line package) of the transfer full mold structure. Ordering number : EN*A1033 Thick-Film Hybrid IC 3-phase Inverter Motor Drive Inverter Hybrid IC Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customers products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customers products or equipment. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to standard application, intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any special applicat