環形加热炉设计稿与仿真说明书.docVIP

毕业设计（论文） 题目： 无锡太湖学院本科毕业设计（论文） 诚 信 承 诺 书 本人郑重声明：所呈交的毕业设计（论文） 是本人在导师的指导下独立进行研究所取得的成果，其内容除了在毕业设计（论文）中特别加以标注引用，表示致谢的内容外，本毕业设计（论文）不包含任何其他个人、集体已发表或撰写的成果作品。 班 级： 学 号： 作者姓名： 201 年 5 月 2 日太湖学院 　　系 　机械工程及自动化 　专业 毕 业 设 计论 文 任 务 书 一、题目及专题： 题目　　　　、专题　 　 二、课题来源及选题依据 、接受任务学生： 班 　　姓名 五、开始及完成日期： 自20年月日 至201年5月2日 六、设计（论文）指导（或顾问）： 指导教师　　　　　　　签名 签名 　　　　　　　签名 教研室主任 　　　　　　〔学科组组长研究所所长〕　　　　　　　签名 　　 　　系主任 　　　　　　 签名 20年1月摘 要关键词：环形加热炉；装取料；有限元分析；高效ABSTRACT In order to adapt to the rapid development in the new century, industrial steel enterprise production capacity has increased a lot then before, the annular heating furnace technology has been more mature, the traditional pushed steel type translation machine dose not suitable for using in the annular heating furnace any more. In order to adapt to the characteristics of the annular heating furnace a new type of feeding machine has been tailored specifically for the annular heating furnace is installed. The model of this machine includes the whole frame, car and clamp stem. Using clamping cylinder and the cylinder to lift the bar clamp on steel clip and lifting movement, and installed with the car pliers stem, can be translated on the rails in the frame. The car was droved by a electric motor, the electric motor was droved by the gears which installed in the motor. According to the characteristics of annular heating furnace, two feeding machines were installed respectively in the loading and discharging part. These two machines simultaneously outfit feeding, greatly improving the efficiency of heating steel, also improve the efficiency of the whole factory work efficiency and economic benefit and coincide with