WS6_Modal Analysis_Block LanczosU_Bracket.ppt

July 30, 1999 Workshop 6Modal Analysis - Block LanczosU-Bracket 6. Modal Analysis - Block LanczosU-Bracket Description Extract the first ten modes of the u-bracket model using the Block Lanczos method. List the frequencies and plot the von Mises stress for all the modes. Next, plot the mode shape for the first mode and then animate it. 6. Modal Analysis - Block Lanczos U-Bracket Loads and Material Properties 6. Modal Analysis - Block Lanczos U-Bracket 1. Enter ANSYS in the working directory specified by your instructor using “u-bracket” as the jobname. 2. Resume the “u-bracket.db1” database file: Utility Menu File Resume from … Or issue: RESUME,u-bracket,db1 3. Enter Solution and constrain all dofs on the area on top of the u-bracket (area number 17): Main Menu Solution -Loads- Apply -Structural- Displacement On Areas + Or issue: /SOLU DA,17,ALL 6. Modal Analysis - Block LanczosU-Bracket 4. Define the analysis type as modal: Main Menu Solution -Analysis Type- New Analysis ... Or issue: ANTYPE,MODAL 5. Define analysis options: Main Menu Solution Analysis Options … No. of modes to extract = 10 No. of modes to expand = 10 Elcalc = Yes Or issue: MODOPT,LANB,10,0,1000000 EQSLV,SPAR MXPAND,10,,,1 6. Modal Analysis - Block Lanczos U-Bracket 6. Save the database and obtain the solution: Pick the “SAVE_DB” button in the Toolbar (or select: Utility Menu File Save as Jobname.db) Main Menu Solution -Solve- Current LS Or issue: SAVE SOLVE 7. Enter the General Postprocessor and list the ten frequencies: Main Menu General Postproc Results Summary Or issue: /POST1 SET,LIST 6. Modal Analysis - Block Lanczos U-Bracket 8. Plot the von Mises stress for the first mode shape: Main Menu General Postproc -Read Results- First Set Main Menu General Postproc Plot Results -Contour Plot- Nodal Solu ... Or issue: SET,1,1 PLNSOL,S,EQV 6. Modal Analysis - Block Lanczos U-Bracket 9. Plot the von Mises stress for the next mode shape: Main Menu General Postpr