多工位母线加工机冲孔机构设计论文 学位论文.docVIP

摘 要 多工位母线冲压机在机械方面由冲孔单元、剪切单元和折弯单元组成, 装配于同一工作台上形成三工位, 分别完成对铜、铝母线的冲孔、剪切和折弯、压花等工作。本次设计主要是冲孔结构单元的设计。在机械加工的程序中，冲孔是主要的加工之一。很多工序后续的加工，其中冲孔是最基本的环节。因此后续加工的成败及顺利与否，和冲孔的结果是息息相关。这个题目综合性比较强，可以巩固加强所学的知识，提高本人的综合运用知识的能力和解决具有一定复杂程度的工程实际问题的能力。针对多工位母线加工机的工作特点和加工需求，对多工位母线加工机冲孔单元进行结构分析和设计，并对冲孔单元的框架结构进行优化；对冲孔单元的凸、凹模具以及上下模具支架结构进行设计，学会对机构、模具、液压等方面知识的综合应用，初步掌握机构设计、模具设计、液压传动等方面的知识和方法，提高机械设计、工程应用的能力。查阅各方面关于多工位母线冲孔机构设计的有关文献，包括书籍、期刊、论文、设计手册、机械设备和设备技术参数。通过了解这些知识，对国内外的发展、生产制造技术条件、研究水平和未来发展趋势有一个具体详细的了解。再通过外出进厂实习对其有了感性认识，经过不断的选择和优化设计最终确立多工位母线冲孔机构初步的构思。 关键词：液压系统；模具设计；传动系统。 ABSTRACT Multi-station press bus from the punching unit in the machinery, cutting unit and bending units, the assembly formed in the same three-position bench, were completed on copper, aluminum bus bar punching, shearing and bending , embossing and so on. This design is mainly the design of structural unit of punching. In the machining process, punching one of the main processing. Subsequent processing of many processes, which is the most basic aspects of punching. Therefore, the success of subsequent processing and smooth or not, and punching the results are closely related. The subject of comprehensive and strong, you can consolidate the knowledge learned to improve my skills and knowledge of the integrated use of a certain complexity of solving practical engineering problems.Bus for multi-station machine work characteristics and processing requirements, multi-bit bus on the punching machine for structural analysis and design unit, and the punching unit to optimize the frame structure; punching unit of convex and concave mold and the upper and lower Die support structure design, learn to institutions, mold, hydraulic and other aspects of the comprehensive application of knowledge, initial grasp of mechanical design, mold design, hydraulic and other aspects of knowledge and methods to improve mechanical design, engineering capabilities. Access to all aspects of multi-site on the institutional design of bus pu