抗震设计时多塔楼高层建筑结构设计要点.docVIP

抗震设计时多塔楼高层建筑结构设计要点： 1各塔楼质量及侧向刚度宜接近；相对底盘宜对称布置。塔楼结构与底盘结构质心的距离不宜大于底盘相应边长的20%.可利用裙楼的卫生间、楼电梯间等布置剪力墙或支撑。剪力墙或支撑宜沿大底盘周边布置，以增强大底盘的抗扭刚度。 2转换层不宜设置在底盘屋面的上层塔楼内；未能避免时，应有必要的加强措施。 3塔楼中与裙房连接体相连的外围柱、剪力墙，从固定端至裙房屋面上一层的高度范围内，柱纵向钢筋的最小配筋率宜适当提高，柱箍筋宜在裙楼屋面上、下层的范围内全高加密；剪力墙宜按本规程第7.2.12条的规定设置约束边缘构件。 4大底盘多塔楼结构，宜按整体模型和各塔楼分开模型分别计算，整体建模主要计算多塔楼对大底盘部分的影响，分塔楼计算主要验算各塔楼结构扭转位移比，并应符合本规程第4.4.4条的有关要求。 试验研究和计算分析表明，当各塔楼的质量和刚度存在较大差别时，塔楼的不同步振动对大底盘的影响较大。因此对多塔楼结构各塔楼的体量以及塔楼相对于底盘位置作了规定，同时提供增强大底盘的抗扭转刚度的可行且有效做法。 以上内容均根据学员实际工作中遇到的问题整理而成，供参考，如有问题请及时沟通、指正。             广州珍珠岩 广东珍珠岩 广东珍珠岩厂 编辑:ejdnchh  1.6 high vocational designed manufacturing class national career qualification education training programme--car detection and maintenance technology professional teaching plans a, and training target and training specifications car detection and maintenance technology professional training oriented car Hou market of car maintenance, and car sales and after-sales service integration enterprise, and and and car using and maintenance about of career field of production, and service, and management line post, training support party of line, adapted car maintenance, and car using front line need, de, and wisdom, and body, and beauty full development, Has good all-around professional ability, knowledge of professional theoretical knowledge and good practice, can successfully enter car market employment, through vocational training, continuing education, self-taught, to continue learning channels to achieve all-round development in all aspects of vehicle inspection and maintenance technology of high quality workers. Through the system of training, so that students have a scientific world Outlook, Outlook on life and the spirit of patriotism, collectivism 1.6 hig