飞利浦HD原理.pptVIP

Ultrasound, Apr 2008 * 维修案例分享 HD11 XE zhanghua  HD11 XE Black Screen HD11 XE loses video (Black Screen) during booting or real scanning. The follow spare parts were replaced for the issue during Jan and Feb. - 12 PC display processor; - 5 Power supply - 3 Monitor LCD Most of this kind of failure are caused by Graphics card, just like EnVisor’s. FC HD11显示屏偶发性黑屏 机器随机地出现启动黑屏，LCD显示“No signal input”。但在工作站上可以看到机器正常启动。另外，在正常使用中，有时机器也出现黑屏过一段时间恢复正常的现象。 更换过PC，RearI/O，显示器，显卡到RearIO的视频线。（该设备是2.0硬件，对于2.0之前硬件版本的机器，视频线直接从显卡到显示器）问题依旧。 最后更换Rear IO到显