cr(vi)吸附菌的筛选及其对cr(vi)_学位论文.docVIP

cr(vi)吸附菌的筛选及其对cr(vi)_学位论文.doc

  1. 1、本文档共22页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  5. 5、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  6. 6、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  7. 7、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  8. 8、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
cr(vi)吸附菌的筛选及其对cr(vi)_学位论文

Cr(VI)吸附菌的筛选及其对Cr(VI) 的吸附性能研究 摘要 生物吸附是一种新兴的重金属污染治理技术,生物吸附剂来源广泛、价格低廉,且对重金属去除效率高而无二次污染,具有良好的工业应用前景。 本课题选择污水处理厂、电镀厂的活性污泥及啤酒厂的啤酒酵母为菌种来源,筛选出最佳Cr(VI)吸附菌,并对该菌的Cr(VI)生物吸附特性进行研究,结果表明:三菌种在相同的条件下处理含铬废液,啤酒酵母表现出最好的Cr(VI)生物吸附性能,吸附率达到72.6%;对啤酒酵母菌吸附Cr(VI)的生物吸附特性进行考察得出吸附反应进行的适宜反应时间为90min,最佳pH值为2,最适宜的Cr(VI)初始浓度为20mg/L,吸附剂最佳用量为0.3g,吸附性能随温度的升高而提高。在室温(25℃)下,控制反应条件为以上最佳条件参数进行啤酒酵母菌吸附Cr(VI)的综合实验,此时的Cr(VI)去除率高达91.4%。在此基础上用0.5mol/L的HCI对啤酒酵母菌进行预处理,可使其对Cr(VI)生物吸附性能得到进一步提升,达到了96.3%。 关键词:生物吸附,啤酒酵母,Cr(VI),重金属 ABSTRACT Bio-sorption was a sort of new technology for heavy metal removal, had a good prospects for industrial applications,for it had highly heavy metal removal effect and without secondary pollution, as well as the Bio-absorbent was low-cost and abundant in source. Activated sludge of sewage treatment plants and electroplating plant, and the brewer’s yeast were chosen to be as the source bacterium in this study to screen out the best Cr(VI)-adsorption bacteria, and to discuss its adsorption characteristics of Cr(VI) .The results showed: Under the same conditions, three species were dealed with waste water of chromium, brewers yeast appeared the best bio-sorption performance of Cr(VI), with the absorption rate 72.6 % ; And the further experiment for beer yeast bio-sorption Cr (VI) got the conclusion that, the appropriate reaction time was 90 min, the best pH value was 2, the most appropriate initial concentration of Cr (VI) was 20 mg/L, and the best amount of absorbent was 0.3g, increasing the temperature would improve the adsorption effect of brewer’s yeast . At room temperature (25℃), controlling all the other conditions were the best values as above for the synthetical experiment, Cr(VI)-bio-sorption of beer yeast reached 91.4 %. beer yeast pretreated with 0.5mol/L HCI got a more high adsorption effect 96.3%. Key words: biosorption, brewers yeast, Cr (VI), heavy metals 目 录 摘要 I ABSTRACT II 1 绪论 1 1.1 研究背景 1 1.2 铬的基本性质 1 1.2.1铬的物理化学性质 1 1.2.2 铬的生物效应 2

您可能关注的文档

文档评论(0)

店小二 + 关注
实名认证
文档贡献者

包含各种材料

1亿VIP精品文档

相关文档