Gates Synchronous Metal.pdfVIP

Markets/Applications Use with Poly Chain GT2, Poly Chain GT or Poly Chain GT Carbon? Belts. Features/Advantages n Full split in bushing allows easy installation and removal. n Precise sprocket design produces positive, press fit to shaft. n Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer. n Poly Chain GT2 Sprockets keep overhung load below manufacturers recommendation. n Sprockets are precision manufactured and static balanced. Notes Sprocket part numbers are comprised of pitch, number of grooves and width. For example; part number 8MX-48S-12 denotes 8mm pitch, 48 grooves, “S” for sprocket and 12mm width. On a sprocket, pitch is the distance between groove centers and is measured on the pitch circle of the sprocket. The pitch circle of the sprocket coincides with the pitch line of the belt mating with it. The pitch diameter of the sprocket is always greater than its outside diameter. Abbreviations used for sprocket materials: GI=Gray Iron, DI=Ductile Iron, SiS=Sintered Steel, CI=Cast Iron. WARNING: Do NOT use these sprockets with rim speeds in excess of 6,500 fpm. Product No. Series 7715 7718 8mm Pitch Sprockets — For Belts 12mm Wide Part No. Product No. No. of Grooves Pitch Dia. (In.) Wt. Ea. (Lbs.) Material Bore or Bushing Bore Range (In.) 8MX-22S-12 7718-1022 22 2.206 .70 DI 1008 1/2 - 1 PB8MX-22S-12 7715-1222 22 2.206 .90 DI MPB 1/2 - 1 8MX-25S-12 7718-1025 25 2.506 .75 GI 1108 1/2 - 1 1/8 PB8MX-25S-12 7715-1225 25 2.506 1.00 DI MPB 1/2 - 1 1/2 8MX-26S-12 7718-1026 26 2.607 .60 CI 1108 1/2 - 1 1/8 8MX-27S-12 7718-1027 27 2.707 .70 CI 1108 1/2 - 1 1/8 8MX-28S-12 7718-1028 28 2.807 .91 GI 1108 1/2 - 1 1/8 PB8MX-28S-12 7715-1228 28 2.807 1.40 DI MPB 1/2 - 1 3/4 8MX-29S-12 7718-1029 29 2.907 .90 CI 1108 1/2 - 1 1/8 8MX-30S-12 7718-1030 30 3.008 .98 GI 1108 1/2 - 1 1/8 PB8MX-30S-12 7715-1230 30 3.008 1.60 DI MPB 1/2 - 1 1/8 8MX-31S-12 7718-1031 31 3.108 1.10 DI 1210 1/2 - 1 1/4 8MX-32S-12 7718-1032 32 3.208 1.