揚州市某办公楼设计书毕业设计书计算书i.docVIP

河 北 工 业 大 学 毕业设计说明书 作 者： 学 号： 学 院： 土木工程学院 系(专业)： 土木工程 题 目： 某楼设计之 指导者： 教授 (姓 名) (专业技术职务) 评阅者： 教授 (姓 名) (专业技术职务) 2013 年 月 日 毕业设计中文摘要 市某楼设计之 摘要： 该是层钢筋混凝土框架结构，本设计包括建筑设计和结构设计个部分。 在建筑设计中，充分考虑了结构简单、传力路径尽量短等原则，采用了结构构件尽量对称布置的方法，以利于建筑的抗震，在设计的过程中尽量做到经济、美观、合理。建筑设计主要是确定建筑方案，绘制建筑图。结构设计包括确定结构方案，学习PKPM软件，用该软件建立结构模型，进行结构分析，对不合理之处进行调整，最后绘制梁、柱施工图和楼梯施工图。对软件结果进行分析时，重点考虑了刚重比，周期比，薄弱层，剪重比，位移比，有效质量系数等参数信息楼梯配筋采用手算。 关键词： 框架结构 办公楼 结构设计 建筑设计 钢筋混凝土结构 毕业设计外文摘要 Title a Office Building design of Yangzhou With the Underground Parking Abstract The office building is seven layers of steel reinforced concrete structure of the design framework with the underground garage, including architectural design and architecture design two parts. This design of the building is located 7 (0.15g)degrees anti-earthquake zone,site category Ⅲ class venues,building height 30m, seismic rating of three; construction plan is a glyph, with a total gross floor area of approximately 6000m2.In architectural design, a full account of the structure is simple,and the force transmission path is as short as possible, using a symmetrical arrangement of structural elements as a method to facilitate the construction of seismic, as far as possible in the design process to achieve economic, appearance and reasonable. Architectural design is to determine the main building program,and learn applications AutoCAD to draw the floor plan. Determine the structure of the program, including structural design, conduct column grid layout and load layout, learning PKPM software to create structure model , structural analysis, unreasonable adjustments, the final draw beams, columns construction drawings and construction plans of stairs. When analyzing the results of the software,We focus on the ratio of stiffness