IndustrialPoEEthernetExtender.PDFVIP

| orderIng InFormAtIon Model nuMBer descriPtion EIRP-EXTEND PoE Plus DIN Rail Mount Ethernet Extender Industrial Poe ethernet extender EIRP-EXTEND Extending Ethernet to allow the PoE+ port to reach IP cameras, IP phones, and Ethernet connected control devices is simple and reliable with BB Electronics’ Ethernet Extenders. The EIRP series extenders offer built-in PoE+ technology which allows the end device, such as an IP camera, to be powered directly from the extended Ethernet port. Used with a 2nd extender the configuration is easy. Configure one unit as the local device, and the other one as the remote device. External power supplies are required (not included). ? IEEE802.3at 30W PoE + /PSE power for last mile applications ? Complies with UL508 and NEMA TS1 TS2 environmental requirements for traffic control equipment ? Complies with IEC61000-6-2 EMC generic standard immunity for heavy industrial environment ? Redundant 24 or 48 VDC Power Inputs ? Wide operating temperature ? Extend Ethernet up to 6232 ft. (1.9 km) over standard copper wires ? Ethernet port: PoE Plus + RJ-45 10/100Mbps Full/Half-duplex, Auto-negotiation / Auto-MDI/MDX ? Ethernet extend port: 1 RJ-11 and terminal block 50Mbps full duplex VDSL ? Extender port compatible with models EIS-EXTEND, EIR-EXTEND-x, EIRM-EXTEND-x Product FeAtures AccessorIes PS12VDC3P - Hardened AC Power Supply, 12VDC, 36W, 3A, 90-264VAC input, DC jack MDR-20-24 - DIN rail mount power supply 24VDC, 1.0 A output power MDR-40-48 - DIN rail mount power supply 48VDC, 0.83 A output power C5UMB3FBG - 3 ft. (1 M) - Beige - Category 5e UTP Patch Cord mechAnIcAl dIAgrAm 11.0 cm 4.33 in EIRP-EXTEND-2EIRP-EXTEND-4 5.00 cm 1.97 in 13.5 cm 5.31 in 11.0 cm 4.33 in 5.00 cm 1.97 in 13.5 cm 5.31 in EIRP-EXTENDEIR-EXTEND-4 5.00 cm 1.97 in 13.5 cm 5.31 in 5.00 cm 1.97 in 13.5 cm 5.31 in 11.0 cm 4.33 in EIRP-EXTEND-2EIRP-EXTEND-4 5.00 cm 1.97 in 13.5 cm 5.31 in 11.0 cm 4.33 in 5.00 cm 1.97 in 13.5 cm 5.31